Glo wordmark logo
← All articles
DOOH

DOOH CPMs & Pricing, Explained

The Glo Team8 min read

A DOOH CPM is the price of 1,000 views of your ad on screens outside the home. It is the most common way digital billboards, bus shelter screens, and TVs in venues are priced once you get past a flat monthly rate. If you understand one number before you buy screen time, make it this one. It lets you compare a quote for one roadside board with a daily budget spread across fifty screens in your neighborhood.

If you are new to screens outside the home, start with what DOOH advertising is. This page is only about the price tag: what CPM means, how to do the math, and what moves the number.

What CPM means

CPM stands for "cost per mille." Mille is Latin for thousand. So a CPM is the cost of 1,000 impressions.

An impression is one estimated view of your ad. On a phone, an impression can be counted exactly, because the phone knows when the ad loaded. A screen on a street corner cannot see who looked at it. So DOOH impressions are estimates. The screen owner, or a measurement company it works with, uses things like traffic counts, foot traffic data, and the screen's size and angle to estimate how many people were likely to see each play. How those estimates are made is covered in how DOOH advertising is measured.

That point matters for pricing. When you pay a CPM on a screen, you are paying for a modeled audience, not a counted one. Two sellers can model the same street differently.

How to do the math

You only need one formula, and you can run it in either direction.

  1. Cost = (impressions ÷ 1,000) × CPM
  2. Impressions = (budget ÷ CPM) × 1,000
  3. CPM = (cost ÷ impressions) × 1,000

Here is a worked example with made-up round numbers. They show the math, not real market rates.

  • A seller quotes a CPM of $10.
  • You have $300 to spend.
  • $300 ÷ $10 = 30. Multiply by 1,000 and you get 30,000 estimated impressions.

Now flip it. Another seller offers a flat $500 for two weeks and estimates 40,000 impressions over that time. $500 ÷ 40,000 × 1,000 = $12.50. That is the effective CPM, and now you can compare the two offers side by side.

This is the main reason to learn CPM. Screen time gets quoted in different ways. CPM puts them all on the same scale.

Plays, spots, and CPM

Some sellers do not quote a CPM at all. They quote plays or a share of the loop.

  • Spot: one play of your ad, often a few seconds long.
  • Loop: the full playlist of ads on a screen. When it ends, it starts again.
  • Share of voice: how much of the loop is yours. One spot in a loop of eight ads is one eighth of the screen time.

You can still turn these into a CPM. Ask how many impressions the seller estimates per play, or for the whole booking. Then divide your cost by those impressions and multiply by 1,000. If a seller cannot tell you an impression estimate at all, you can still compare cost per play, but you lose the ability to compare against other kinds of screens.

What pushes a DOOH CPM up or down

The price of 1,000 views is not fixed. It moves with supply and demand, like hotel rooms. These are the main levers.

Factor Tends to raise the CPM Tends to lower the CPM
Location Downtown cores, famous intersections, busy shopping streets Quieter streets, suburbs, smaller towns
Screen type Large roadside boards and landmark screens Smaller indoor screens, like TVs in cafes and gyms
Time of day Rush hours and weekend evenings Late night and early morning
Season Holiday shopping weeks and big local events Slow months after the holidays
Targeting Narrow rules, like one exact hour on one exact block Broader areas and wider schedules
How you buy Guaranteed slots on a specific board Buying by budget across many screens

Two of these deserve a closer look.

Targeting. The more you narrow when and where your ad plays, the fewer screen plays fit your rules, and the more each one tends to cost. Narrowing is often still worth it. A higher CPM on screens your customers actually pass can beat a cheap CPM on screens they never see.

How you buy. Booking a guaranteed share of one specific board is a bit like reserving a table at a busy restaurant. You pay for certainty. Buying by budget, where software places your ad across matching screens in an area, usually means more flexibility on price. That style of buying is often called programmatic. It just means a system places the ad automatically based on your rules. The details are in programmatic DOOH explained.

CPM is a starting point, not the answer

A low CPM is not automatically a good deal. Here is why.

  • Wrong audience. A cheap CPM on a highway full of through traffic does little for a shop that serves four blocks. Ask whether the people passing would come to your door.
  • Different estimates. Each seller models impressions their own way. A seller with generous estimates will show a lower CPM for the same real crowd.
  • Hidden costs. Some direct deals add production, installation, or setup fees. Add them to the cost before you calculate the CPM.
  • Minimums. A great CPM tied to a three-month minimum may cost more in total than you want to risk on a first test.

So use CPM to compare offers. Then judge each offer on fit: right streets, right hours, right people.

How to compare two DOOH quotes

Use these steps any time you have two or more offers on the table.

  1. Get the total cost. Include every fee, not just the headline price.
  2. Get the impression estimate for the same dates, and ask how it was calculated.
  3. Work out each effective CPM with the formula above.
  4. Check the fit. Map where each screen sits relative to your customers.
  5. Check the terms. Contract length, payment timing, and whether you can pause.
  6. Check the reporting. Will you see when and where your ad played? A report showing each play is often called proof of play.
  7. Pick the offer with the best fit at a fair CPM, not the lowest CPM alone.

If you are buying a single board directly, the full checklist of questions to ask the owner is in how to buy a digital billboard.

How DOOH pricing compares with other screens

People often ask how DOOH CPMs stack up against connected TV, social, or printed billboards. The honest answer is that it depends on the market, the season, and the seller, and prices change often. Rather than repeat numbers that may be out of date, we keep the broader cost picture in two places. How much DOOH and CTV advertising cost covers budgets for screens and streaming together. How much billboard advertising costs covers the traditional printed and digital roadside side.

How to set a budget when you do not know the CPM

You do not need to know the exact CPM to start. A simple approach for a first campaign:

  1. Pick the area first. Your trade area, where your customers come from, decides which screens matter.
  2. Pick a daily amount you are comfortable losing while you learn. Treat the first weeks as a test.
  3. Run long enough to repeat. People need to see a screen ad more than once for it to stick. A few days is rarely enough to judge.
  4. Watch what the budget buys. Look at plays and screens in your report, then raise or lower spend.
  5. Measure something real. Searches for your name, calls, walk-ins, or a QR code on the ad. DOOH for small business has a simple plan for this.

How this works on Glo

On Glo OOH you do not need to request a rate card or work out a CPM before you start. You set the area, from one block to a whole city, and a daily budget. Your ad runs on screens inside that area: TVs in bars, gyms, cafes and stores, plus street screens like digital billboards, bus shelters and gas-pump screens. You can see the screens near you before you spend anything, and each screen shows up in your dashboard with its own spend, plays, and results. Raise the daily budget to reach more screens, or lower it to slow down.

Glo is self-serve advertising for every screen, screens first. Plans start from $17/day on Glo pricing, with no contract. You are charged only on days the ad runs, and you can pause anytime. Streaming TV at home is an add-on through Glo commercials. More on how plans fit together is on Glo ads.

Need an ad first? A Reel or TikTok works, or Glo Spark makes three free concepts. Then follow launch a campaign in 60 seconds.

Questions people ask

What does CPM stand for in DOOH?

CPM means "cost per mille," or cost per thousand. In DOOH, it is the price you pay for 1,000 estimated views of your ad on screens outside the home.

How are DOOH impressions counted if the screen cannot see people?

They are estimated, not counted. The screen owner or a measurement partner models how many people were likely to see each play, using things like traffic counts, foot traffic data, and the screen's size and position.

How do I calculate the CPM of a flat-rate billboard quote?

Divide the total cost by the estimated impressions for the booking, then multiply by 1,000. Include any setup or production fees in the total cost so the comparison is fair.

Is a lower DOOH CPM always better?

No. A low CPM on screens your customers never pass is wasted money. Use CPM to compare offers, then choose the one whose screens sit where your customers are, at the hours they are there.

Why do DOOH CPMs change so much?

The price moves with demand. Busy locations, rush hours, holiday weeks, and narrow targeting rules all push it up. Quieter areas, off-peak hours, and broader schedules tend to bring it down.

Do I need to understand CPM to advertise on screens?

It helps when you compare quotes from different sellers. On a self-serve platform where you set a daily budget, you can start without calculating it, then look at what your budget bought in the report.

Ready to light up every screen they watch?

Glo ads put your business on the screens in bars, gyms, cafes, stores and on the street near you. Turn one good video into a local campaign, from a single block to your whole city. Starting from $17/day. No contract.

See a sample campaign wrap or pricing.